DIY Multirotor set APM2.6 Flight Controller & 6M GPS & 433mHz Radio Telemetry & OSD & Power Moudel for RC Ground Station Hobby

DIY Multirotor set APM2.6 Flight Controller & 6M GPS & 433mHz Radio Telemetry & OSD & Power Moudel for RC Ground Station Hobby

Click Here !!

If you are trying to find Cheap Remote Control Helicopter then nowadays you are in the appropriate site.
DIY Multirotor set APM2.6 Flight Controller & 6M GPS & 433mHz Radio Telemetry & OSD & Power Moudel for RC Ground Station Hobby is one of the Cheap Remote Control Helicopter in the market. This Perfect merchandise brings to you to suit your needs.
Here, we present to you some of Cheap Remote Control Helicopter.

DIY Multirotor set APM2.6 Flight Controller & 6M GPS & 433mHz Radio Telemetry & OSD & Power Moudel for RC Ground Station Hobby

• APM2.6 Specifications: Compare with APM 2.52: APM 2.6 without welding electronic compass on the mainboard, the board has no onboard compass. System: complete open source autopilot system APM2.6 Features: 1. It allows the user to turn any fixed, rotary wing or multirotor vehicle (even cars and boats)into a fully autonomous vehicle; capable of performing programmed GPS missions with waypoints. 2. This revision of the board has no onboard compass, which is designed for vehicles (especially multico
• m noise sources than APM itself. 3. APM 2.6 requires a GPS unit and external compass for full autonomy. Choose your compass from options menu at right. 433Mhz Radio Telemetry Specificaitons: Antenna connectors: RP-SMA connector Output Power: 100mW (20dBm), adjustable between 1-20dBm Sensitivity: -117dBm sensitivity Interface: standard TTL UART Connection status: LED indicators GPS Specifications: With fast satellite searching speed and high precision Power supply cable: the def ault style of AP
• pters and rovers) where the compass should be placed as far from power and motor sources as possible to avoid magnetic interference. (On fixed wing aircraft it's often easier to mount APM far enough away from the motors and ESCs to avoid magnetic interference, so this is not as critical, but APM 2.6 gives more flexibility in that positioning and is a good choice for them,too). This is designed to be used with the 3DR uBlox GPS with Compass , so that the GPS/Compass unit can be mounted further fr

APM2.6 Specifications: Compare with APM 2.52: APM 2.6 without welding electronic compass on the mainboard, the board has no onboard compass. System: complete open source autopilot system APM2.6 Features: 1. It allows the user to turn any fixed, rotary wing or multirotor vehicle (even cars and boats)into a fully autonomous vehicle; capable of performing programmed GPS missions with waypoints. 2. This revision of the board has no onboard compass, which is designed for vehicles (especially multicopters and rovers) where the compass should be placed as far from power and motor sources as possible to avoid magnetic interference. (On fixed wing aircraft it's often easier to mount APM far enough away from the motors and ESCs to avoid magnetic interference, so this is not as critical, but APM 2.6 gives more flexibility in that positioning and is a good choice for them,too). This is designed to be used with the 3DR uBlox GPS with Compass , so that the GPS/Compass unit can be mounted further f rom noise sources than APM itself. 3. APM 2.6 requires a GPS unit and external compass for full autonomy. Choose your compass from options menu at right. 433Mhz Radio Telemetry Specificaitons: Antenna connectors: RP-SMA connector Output Power: 100mW (20dBm), adjustable between 1-20dBm Sensitivity: -117dBm sensitivity Interface: standard TTL UART Connection status: LED indicators GPS Specifications: With fast satellite searching speed and high precision Power supply cable: the default style of APM Compass: 6M Terminal outgoing lines: compatible with APM serial port and I2C port OSD Specifications: Operating voltage: 5V-12V Application: DIY flight control Quadcopter OSD Features: 1. Perfect combination of ATmega328 and MAX7456. 2. Flight control OS functions 3. Supports MAVLink protocol. 4. Uses MAVLink OSD. 5. Supports APM2.6 APM2.5.2 flight model. Power Module Specifications: Max input voltage: 25V Max current sensing: 90A Voltage and current measurement configured for 5V ADC Swit

Check Price & More Information >>>

Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on this site at the time of purchase will apply to the purchase of this product.